fbpx

Grozone Control CO2D 0-5000 PPM Dual Zone CO2 Controller

Environmental Controllers

Showing 1–12 of 62 results

  • Grozone Control CO2D 0-5000 PPM Dual Zone CO2 Controller

    $924.86

    Controls the CO2 levels in two zones (or two rooms) simultaneously. Review performance by reading through the integrated 24 hr data logger (minimum, maximum and average values for each hour of operation). Special operating mode to operate two zones with only one CO2 generator. Zone remote sensors include 25 ft cables. Affordable alternative when operating multiple zones.

    Quick View
  • Grozone Control SCO2 0-5000 PPM CO2 Controller – Simple One Series

    $509.95

    This easy-to-use CO2 controller determines precisely when to activate and shut-off CO2 generators to maintain user-defined LOW and HIGH CO2 values in the grow room. The unit can deactivate CO2 enrichment during the night cycle and perform CO2 evacuation as well. The CO2 sensor is located in the controller box.

    Quick View
  • Hyper Fan Temperature Speed Controller (18/Cs)

    $127.00

    The Hyper Fan® Temperature Speed Controller is extremely easy to use. Set the two dials and you will have complete control of your environment. The Hyper Fan® Fan/Controller combo has the lowest energy use of any fan/controller system out today. The controller thermostatically changes the fan’s RPM/speed as needed. For use with EC Hyper Fans only. All wire connections included.

    Quick View
  • Link4 iPonic 614

    $1,699.00

    The original iPonic hydroponic environmental controller enables growers to control a grow environment with Cloud-based access from any Internet-connected computer or smartphone. Unlike most controllers on the market, the iPonic controller allows you to program all functions together and eliminate multiple controllers for multiple functions – the iPonic does it all: Fuzzy Logic CO2, light timer, temperature, humidity, recycle timers, vent fans, high temperature shut-off, irrigation, central air conditioning and heating – even add your own custom devices. This also means that you can change devices on the fly – add or delete devices to match the equipment in your grow house in minutes. The iPonic 614 is a single-zone controller that includes 8 120-volt outlets of which 6 are fully-programmable. They are available for a combination of devices such as central air conditioning, heaters or any device with a remote thermostat connection. Controller includes a single Digital Integrated Sensor Module (DISM) that measures temperature, humidity, CO2 and lighting. The iPonic 624 is a dual-zone controller that shares 8 120-volt outlets between both rooms. The iPonic 624 comes with dual Digital Integrated Sensor Modules (DISM) for full independent control of each room.

    Quick View
  • Link4 iPonic 614 Alert Single Zone

    $799.00

    Available in single room (614), the iPonic Alert is a cloud-based monitoring and alarm system. With simple plug-and-play functionality, any grower can learn what is going on in their grow room – from any Internet connected device. The iPonic Alert is ideal for the cultivator that is satisfied with their current controls, but wants the extra assurance of push notifications sent to their smart phone in the event anything should go wrong. The iPonic Alert comes with a Digital Integrated Sensor Module (DISM) that provides temperature, CO2, light and humidity monitoring from one easy to install device.

    Quick View
  • Link4 iPonic 624

    $2,449.00

    The original iPonic hydroponic environmental controller enables growers to control a grow environment with Cloud-based access from any Internet-connected computer or smartphone. Unlike most controllers on the market, the iPonic controller allows you to program all functions together and eliminate multiple controllers for multiple functions – the iPonic does it all: Fuzzy Logic CO2, light timer, temperature, humidity, recycle timers, vent fans, high temperature shut-off, irrigation, central air conditioning and heating – even add your own custom devices. This also means that you can change devices on the fly – add or delete devices to match the equipment in your grow house in minutes. The iPonic 614 is a single-zone controller that includes 8 120-volt outlets of which 6 are fully-programmable. They are available for a combination of devices such as central air conditioning, heaters or any device with a remote thermostat connection. Controller includes a single Digital Integrated Sensor Module (DISM) that measures temperature, humidity, CO2 and lighting. The iPonic 624 is a dual-zone controller that shares 8 120-volt outlets between both rooms. The iPonic 624 comes with dual Digital Integrated Sensor Modules (DISM) for full independent control of each room.

    Quick View
  • Link4 iPonic 624 Alert Dual Zone

    $999.00

    Available as a two room (624) option, the iPonic Alert is a cloud-based monitoring and alarm system. With simple plug-and-play functionality, any grower can learn what is going on in their grow room – from any Internet connected device. The iPonic Alert is ideal for the cultivator that is satisfied with their current controls, but wants the extra assurance of push notifications sent to their smart phone in the event anything should go wrong. The iPonic Alert comes with a Digital Integrated Sensor Module (DISM) that provides temperature, CO2, light and humidity monitoring from one easy to install device.

    Quick View
  • Link4 iPonic Commercial 614

    $2,999.00

    The iPonic 614 and 624 Commercial is designed for your convenience – pre-mounted, pre-wired, and pre-tested. Pre-mounted means an easier and cheaper installation process with no need for separate boxes with conduits in between. Pre-wired means it works as soon as you take it out of the box. The iPonic Commercial enables growers to control a single or dual zone – with cloud-access from any Internet-connected computer or smartphone. Unlike most controllers on the market, the iPonic Commercial controller allows total flexibility using software-based intelligence. This means that you can program all functions together and eliminate multiple controllers for multiple functions – the iPonic does it all: Fuzzy Logic CO2, light timer, irrigation, temperature, humidity, recycle timers, vent fans, high temperature shut-off, central air conditioning and heating – even add your own custom devices. This also means that you can change devices on the fly – add or delete devices to match the equipment in your grow house in minutes. Controller includes a single (or dual) Digital Integrated Sensor Module (DISM). The sensor measures temperature, humidity, CO2 and lighting.

    Quick View
  • Link4 iPonic Commercial 624

    $3,799.00

    Available in single room (614) or two room (624) options, the iPonic Alert is a cloud-based monitoring and alarm system. With simple plug-and-play functionality, any grower can learn what is going on in their grow room – from any Internet connected device. The iPonic Alert is ideal for the cultivator that is satisfied with their current controls, but wants the extra assurance of push notifications sent to their smart phone in the event anything should go wrong. The iPonic Alert comes with a Digital Integrated Sensor Module (DISM) that provides temperature, CO2, light and humidity monitoring from one easy to install device.

    Quick View
  • Replacement Sensor for Spartan Series Basic CO2 Controller

    $365.27

    Simple and easy-to-use, the Spartan Series Basic CO2 Controller gives you everything you need to accurately raise the CO2 levels in your growing environment. A large easy-to-read display will show you what your ppm levels are and knobs that double as buttons when pushed allow you to quickly and easily program the controller to your liking. This unit features an override function that allows it to be used in conjunction with a stand-alone exhaust controller so that you are not putting valuable CO2 into your room while it is being vented. This product also features fuzzy logic capabilities for use with CO2 regulators. Enclosure resists dust, rust and moisture. 10 Amps maximum/ 120 V/ 60 Hz.

    Quick View
  • Titan Controls – Spartan Series 4 Light Controller – 240 Volt (7/Cs)

    $143.60

    The 4 light controller operates up to 4000 W of grow lights in your garden. It features heavy-duty definite purpose contactor, trigger cord set that activates your lights via an external wall timer and universal outlets that allow the use of 120 V or 240 V cord sets. The controller is housed in a rust-, dust- and moisture-proof enclosure. 30 Amps input power/20 Amps output power/240 V/60 Hz/4000 W.

    Quick View
  • Titan Controls – Spartan Series 8 Light Controller – 240 Volt

    $241.88

    The 8 light controller operates up to 8000 W of grow lights in your garden. It features heavy-duty definite purpose contactors, dual trigger cord sets that give you the flexibility to stagger lighting schedules or delay starting times via an external wall timer and universal outlets that allow the use of 120 V or 240 V cord sets. The controller is housed in a rust-, dust- and moisture-proof enclosure. 50 Amps input power/40 Amps output power/240 V/60 Hz/8000 W.

    Quick View
X
Skip to content